Hand Stripping Furniture
Directions for HAND Stripping. - Work with plenty of ventilation, safety goggles or glases, and skin protection. Stay out of the direct sun and stay protected from wind or strong drafts if working outside.
- Work in small areas starting at the top and working to the bottom of the piece. Apply a generous coat of gel remover. Brush on in one direction. Do not brush back and forth.
- Use soft wood scrapers and/or Steel Wool to remove crinkled finish and spent stripper.Repeat the above process until all layers of old finish are gone. On fine work, when the piece has all the finish gone and looks ready to refinish, go over it again with one last coat of stripper carefully working from top to bottom and removing stripper with Liberon #00 steel wool to ensure all traces of finish are lifted from the pores of the wood. Neutralize the wood surface by washing the piece down with Naphtha followed by Lacquer Thinner, if the piece is newer and in very good condition, a washdown with Lacquer Thinner may suffice.
- Let the stripped piece dry thoroughly for at least 24 hours to 48 hours for softer woods or pieces that required long soaking to clean off all the finish. Refinish promptly to seal and protect from humidity changes and environmental contamination.
HINTS & TIPS: - Test to see if a through cleaning with Liberon's Wood Cleaner & Wax remover might eliminate the need to totally strip and refinish the piece.
- Use the right stripper for the finish being removed. (Determine finish type with solvents.)
- Use solvent washable strippers or paint removers.
- Avoid water washable removers to minimize grain raising, staining problems, and softening of glues or adhesives and the subsequent lifting of veneers and loosening of joinery.
- Avoid Metal Scrapers of any kind, wood fibers softened from the remover are easily compressed by hard metal edges. These sometimes apparently invisible `indents' can later show up after staining or even under clear coat finishes.
- DO NOT Sand a stripped surface. Sanding removes oxidized fibres, the natural distressing wear and ageing collectors refer to as patina. Upon refinishing uneven and splotchy effects result from the `windows' sanded into the surface. Often sanded areas of stripped wood will not take stain or finish the same as the unsanded part of the same piece. Therefore, for instance, sanding of a table leaf usually means sanding the entire top and remaining leaves. The surface was carefully prepared for the previous finish. Successful refinishing will be much easier if we disturb the wood the very least possible, in the finish removal process. If an area is badly damaged as to require sanding; proceed with care and be aware of the increased finish work that can be created by sanding. Lightly raised grain can in some cases be stained, sealed with sanding sealer, and then sanded instead of sanding on the bare wood.
- Partially strip (on Lacquers): On some pieces a top for instance might be all that really needs to be stripped and totally refinished. Proper cleaning and touch-up of dings, dents, and blemishes on sides or underpinnings with an overfinish of the existing finish might give a very professional result. In the right instance this can be a more profitable for the finisher and offer an affordable option for the customer.
- Use wax paper laid over the remover to slow evaporation and prolong working time. On difficult finishes and in drafty work areas each application of remover can then do more work.
- To lift paint or finish retained in the grain of open pored timber, despite repeated applications of remover, try the following. Let the surface dry for a day, apply a liberal coat of 1 pound cut shellac & and allow to dry throughly then try a coat of remover to lift the shellac and the adhered finish out of the pores. The wax paper trick above helps here also. On hard cases repeat the shellac and remover steps above if positive results come from the first application.
Refinishing Stripped surfaces are always a little more problematic than finishing on new wood. Generally Pigment Wiping Stains are the best choice for coloring on the stripped surface. Lacquer shading stains and lacquer colorants blended into sanding sealer and build coats are a good bet for color correcting. Use amber lacquer on medium to darker woods or stains to give a richer and homogeneous continuity to the piece. On very light timber and on light colors use water -white lacquer or for the very clearest non-yellowing finish use CAB-Acrylic lacquer. IMPORTANT: PROTECT EYES and SKIN. Always test products in an inconspicuous place to check compatibility and end results. Companion Materials & Supplies: - Safety Glasses or face shield for eye protection.
- Heavy duty rubber stripping gloves.
- Apron; preferably rubber or rubber coated.
- WOODEN scrapers (NOT putty knives or metal scrapers)
- Stripping BRUSH: stripper resistant plastic for getting into carvings and mouldig.
- STEEL WOOL:
- #0 or #1 for light clear finishes, #1 or #2 for paints, &
- #3 or #4 for very heavy built up layers of finish.
- Rags.
PRECAUTION: Do not leave impregnated rags wadded or stacked in bundles as these can burst into spontaneous fire. Dispose of rags and waste in accordance with local regulations; or lay rags out flat preferably outside, to dry so as to avoid any fire hazard. About The Author Steve Hattrick Proprietor 10 years experience Konteaki Furniture Importers http://www.hattrick-furniture.co.uk
MORE RESOURCES:
Google News
|
 |
|
|
RELATED ARTICLES
How To Choose Wall Mount Outdoor Mailboxes
Sturdy wallmount outdoor mailboxes are no longer availablein just standard sizes and colors. You can find a wideassortment of wall mount outdoor mailboxes for the outsideof your home in many colors, textures, and materials.
Where's the Care Label for my New Bedspread?
I love bedspreads, don't you? A comforter can be used for the winter months but the bedspread is brought out of the linen closet in the spring when it's warming up and the whole world is freshening and renewing itself outside. A bedspread is available in most any color, pattern or fabric and it can be one of the most expensive items you put in your bedroom.
Single Pane Window Glass Repair in an Aluminum Frame
Let's suppose you still have those old aluminum single pane windows in your house,and one of the neighbor kids throws a ball through it. ( Your kid would never do that!) Depending on where you live in the country, you can pay anywhere from $75 to $150 to get it repaired.
Transform Your Home with Decorative Country Lighting
As we become more of a home-based society, many more of us are pouring money into our houses with DIY renovations.Do it yourself home improvement projects are both rewarding and usually will give you a good return on investment should you decide to sell or refinance your home.
The Solar Energy Industry Grew 67% Last Year: Are You Making the Best Decision for Your Future?
Are you considering using renewable energy resources to heat water or generate electricity?Would you like to be independent from the grid?Do you want to reduce the greenhouse gas emissions you and your family produce?Great! You are not alone in your quest.The demand for solar power energy is growing.
Protecting Yourself from Miter Saw Hazards
A miter saw, also known as a "chop saw," is a circular saw that is mounted on a frame. It is designed to be portable and to make very accurate angled cuts between 45 and 90 degrees.
How to Design a Lighting Plan
You are doing a remodel and know that you want to add some lighting to the room, but your stumped. Where do I start is the most common question I get asked.
Skip Troweling Method for Textured Ceilings
There are several ceiling texture choices to choose from when finishing a room. You can simply apply a flat paint to the ceiling, or spray or roll on a popcorn textured ceiling.
Hardwood Floors: Beautiful, But a Pain to Keep Clean
Hardwood Floors are beautiful to look at and expensive to install. But keeping them clean is not necessarily the easiest thing to do.
Building or Decorating Your Home Requires House Plans
There are some things to consider when creating plans for your home. There are two situations that call for plans or blue prints, either you are building a new home or decorating your present home.
11 Tips for Stripping Wallpaper: How to Get Rid of Ugly Wallpaper!
I broke my promise to myself and stripped wallpaper again. The only reason I did this is for $100,000 profit.
Planning Permission Tips UK - Loft Conversions in UK Properties - Do They Add Value?
We get a great many requests to view the potential of Loft conversions. This type of extension has remained fairly popular since I first started designing property & is perhaps even more in demand now than ever before - especially in dense urban areas where the alternative choices for that fourth bedroom are somewhat limited.
Selecting Color Schemes
Choosing a color scheme for a room can be a daunting task at times, especially if nothing about the room initially jumps out at you. If you find yourself without a particular color preference for a room, you might begin by picking color combinations that are inspired by a favorite fabric pattern.
Single hung aluminum window glass repair
Let's talk about repairing broken glass in an aluminum frame single hung window. If it's the lower sash pane that is broken, it must be removed from the inside.
Keeping Your Home Spa Clean
Purchasing a home spa is a great expense; which can be easily wasted if you don't keep your hot tub in good condition. Hot tubs provide an area for you to relax and unwind at the end of the day.
How to Get the Most Out of Your Home Theater - Without Spending a Fortune
So you've scraped and saved, now you've finally gotten together a semi-respectable home theater system. You want even more, but the idea of spending another few thousand on new front speakers doesn't cut it.
Three Types of Lighting for Room Remodeling
When remodeling a room, choosing the correct lighting is one of the most important considerations. Proper lighting sets the atmosphere of the room, creates a particular mood, or provides accent to an architectural style.
Heres How To Know Which Kitchen Design Is Right For You
Kitchen design is a sea of opportunity filled with potential. Color schemes, wallpaper and other aesthetic additions will make up the design portion of your kitchen.
Home Improvement Projects That Really Pay Off
Many of us watch TV shows and see the miraculous transformation of homes and gardens by professionals and amateur do-it-yourselfers. Is it really that easy, we ask ourselves.
Are Your Ducts Making You Sick?
If you have a heating or cooling systems that uses air ducts, you could have a problem.There are many duct systems that are poorly designed and installed that have the ability to bring pollutants into your home.
|
